Salgsmelding kan skrives her


Easton ACE skaft (12 stk)

NOK3.300,-

Lightweight carbon fiber bonded to a precision 7075 alloy core
Guaranteed straightness: ± .0015”
9-micron polished carbon finish
Weight tolerance: ± 0.5 grains
Components—sold separately
Barelled design

Size - Shaft Weight - Spine @ 28" Span - Stock Length - Maximum Trim Amount - Recommended Point Weight Range

1250 5.1 1.250 26.625 No Limit 60-70

1100 5.1 1.100 28.625 No Limit 70-80

1000 5.7 1.000 28.625 No Limit 70-80

920 5.8 0.920 28.625 9.5 70-80

850 5.7 0.850 28.625 No Limit 70-80

780 6.0 0.780 29.625 No Limit 80-90

720 6.4 0.720 29.625 6.0 80-90

670 5.9 0.670 30.625 No Limit 80-90

620 6.1 0.620 30.625 No Limit 90-100

570 6.3 0.570 31.625 10.0 90-100

520 6.7 0.520 31.625 4.5 90-100

470 6.8 0.470 32.625 6.5 90-100

430 7.0 0.430 32.625 5.5 100-120

400 7.5 0.400 32.625 4.0 100-120

370 7.9 0.370 32.625 4.0 100-120

1 Due to the barrel design of the A/C/E, the weight is an average grains-per-inch of a 29” shaft. Shaft weight is slightly heavier in the
larger diameter center and lighter toward the tapered ends. One inch of shaft cut from the point end typically weighs 5-6 grains.
2 Available as a special order only. Replaced with A/C/C -00 sizes.
3 Recommended that no more than these lengths be cut from the front of the shaft.

Antall:

Velg ønsket variant:




Dette produktet ble innført i vår butikk søndag 15. september 2013.

IP-addressen din er: 54.91.171.137
Kopirett © 2017 Arctic Buesport AS
Drevet av netthandelsløsningen Zen Cart med norsk oversettelse